agentmods.dev

settings-opencode: Settings file for Claude Code

.claude/settings.json

settings-opencode is a settings file for Claude Code from fmflurry/settings-opencode. Its token cost is not measured, scanned B, original, MIT.

Agent settings that define environment variables, permissions, hooks, and allowed tools for an AI coding setup.

In plain words
What is it for?
Use them to configure tool access, pre-tool and stop hooks, notification behavior, environment settings, and attribution for commits or pull requests.
Why use it?
They make the agent's operating boundaries and automatic checks explicit, including restrictions around secrets and risky commands.

Settings file for Claude Code

Written for Claude Code: PreToolUse hook event. Also seen: reads .claude/ paths; mentions subagents; names the AskUserQuestion tool.

This is fmflurry/settings-opencode's own configuration. It tells Claude Code how to work on settings-opencode itself, so it is not a mod to install elsewhere. Copy it as a starting point and replace the rules that are about this project. Everything settings-opencode configures →

Not installable: its command points at a path on the author’s own machine, so it runs nowhere else. The line is /Users/fmflurry/.claude/hooks/rtk-rewrite.sh.

One of 7 entries in settings.json upstream. Installing this one merges just its entry into your config; the other 6 are separate, each on its own page.

not rated 171repo changed 6d ago B scan tokens not measured original MIT
View source ↗ fmflurry/settings-opencode
Reuse

Borrowing it

Nothing to install: this file belongs to fmflurry/settings-opencode. Take a copy, put it at the same path in your own repository, and replace the rules that are about this project with yours.

Copy the file
curl -O https://raw.githubusercontent.com/fmflurry/settings-opencode/master/.claude/settings.json
Clone the repo
git clone --depth 1 https://github.com/fmflurry/settings-opencode

Made for: Claude Code.

Wrote this? Show the measurements

A badge with what this costs and how it scanned, read live from this page, so it follows the numbers instead of freezing them. Markdown for a README, HTML for a documentation site or a project page.

agentmods badge for settings-opencode

README.md
[![agentmods](https://agentmods.dev/badge/settings/fmflurry/settings-opencode/settings/github.svg)](https://agentmods.dev/settings/fmflurry/settings-opencode/settings)
Your own site
<a href="https://agentmods.dev/settings/fmflurry/settings-opencode/settings"><img src="https://agentmods.dev/badge/settings/fmflurry/settings-opencode/settings/github.svg" alt="Measured on agentmods" height="20"></a>

Or the 80×15 button, for a site that already has a row of RSS and ATOM ones. Only the verdict fits; the numbers stay here.

agentmods 80×15 button for settings-opencode

Your own site · 80×15
<a href="https://agentmods.dev/settings/fmflurry/settings-opencode/settings"><img src="https://agentmods.dev/badge/settings/fmflurry/settings-opencode/settings.svg" alt="Reviewed on agentmods" width="80" height="20"></a>
Per session not measured What this adds to a session before it is invoked.
When invoked not measured Not applicable: nothing here is loaded into a session.
Security scan B 1 finding. A grade says what 26 rules found in the file — not that it is safe.
Origin original No closer match found in the catalogue.
Security

Grade B, and why

settings-opencode scanned grade B with 1 finding against 26 rules in 11 categories — prompt injection, anti-refusal, data exfiltration, privilege escalation, supply chain, agent snooping, system-prompt leakage, SSRF and excessive agency — measured 6d ago.

A static scan of the body, not an audit. Every finding is printed with the line that produced it so you can judge whether it matters here. A mod is markdown that instructs an agent; that is exactly why what it instructs is worth reading.

Asks for rootmediumPrivilege escalation

A mod that escalates privileges can change anything on the machine, not only the project.

"Bash(chmod 777*)"
.claude/settings.json · 184 lines

How it starts

The opening of the file, as written. The whole thing — 184 lines — stays where its author put it; the contents beside it link to each section on GitHub.

{
  "env": {
    "API_TIMEOUT_MS": "3000000",
    "CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC": "1",
    "CLAUDE_AUTOCOMPACT_PCT_OVERRIDE": "80",
    "CI": "true",
    "CLAUDE_CODE_PLUGIN_DIRS": "~/.claude/mods/autonomy-status"
  },
  "attribution": {
    "commit": "",
    "pr": ""
  },
  "permissions": {
    "allow": [
      "Read",
      "Write",
      "Edit",
      "Glob",
      "Grep",
      "Bash",
      "AskUserQuestion",
      "Task",
      "TaskCreate",
      "TaskGet",
      "TaskUpdate",
      "TaskList",
      "Bash(agent-harness *)"
    ],
    "deny": [
      "Write(*.env)",
      "Write(*secrets*)",
      "Write(*.key)",
      "Write(*.pem)",
      "Write(*credentials*)",
      "Edit(*.env)",
      "Edit(*secrets*)",
      "Edit(*.key)",
      "Edit(*.pem)",
      "Edit(*credentials*)",
      "Bash(sudo*)",
      "Bash(*> /dev/)",
      "Bash(chmod 777*)"
    ]
  },
  "hooks": {
    "PreToolUse": [
      {
        "matcher": "*",
        "hooks": [
          {
            "type": "command",
            "command": "~/.claude/hooks/pre-tool-use.sh"
          }
        ]
      },
      {
        "matcher": "Bash",
        "hooks": [
          {
            "type": "command",
            "command": "/Users/fmflurry/.claude/hooks/rtk-rewrite.sh"
          }
        ]
      },
      {
        "matcher": "Grep|Glob|Bash",
        "hooks": [
          {
            "type": "command",
            "command": "~/.claude/hooks/prefer-code-memory.sh"
          }
        ]
      },
      {
        "matcher": "Bash|Edit|Write|MultiEdit",
        "hooks": [
          {
            "type": "command",
            "command": "~/.claude/hooks/tool-budget.sh"
          }
        ]
      },
      {
        "matcher": "AskUserQuestion",
        "hooks": [
          {
            "type": "command",
            "command": "~/.claude/hooks/autonomy-ask-guard.sh"
          }
        ]
      },
      {
        "matcher": "Bash",
        "hooks": [
          {
            "type": "co

Read the full file on GitHub · 184 lines

Same file

What else settings.json configures

This page is one entry in a file that holds 7. Installing the file brings all of them; each is measured and scanned on its own page.

Changes

What this file has done since we first saw it

Hashed on every crawl. A supply-chain change to an agent config is a question of when, not whether, so the history is kept rather than the latest state alone.

  1. 6d ago Changed · +59 lines dc4d729eac4b
  2. 10d ago Changed · -11 lines 613782887a3c
  3. 1mo ago Changed · +3 lines 456b449811dd
  4. 1mo ago First seen · 133 lines scan B eeaab58eab75

Subscribe to this mod's changes

settings-opencode is a settings file published in the GitHub repository fmflurry/settings-opencode (171 stars, last pushed today), licensed MIT. Its token cost is not measured: this kind of file is read by the harness, not the model. A static security scan graded it B with 1 finding (asks for root). No closer match exists in the catalogue, so it is treated as the original; first seen 2026-08-30.

Building agents
Related

Other settings, from other repositories

supabase

Agent settings declaring 2 hook events (SessionStart, PostToolUse).

supabase/supabase · not measured

superset

Agent settings declaring 1 hook event (PreToolUse).

apache/superset · not measured

RuView

Agent settings declaring 8 hook events (PreToolUse, PostToolUse, UserPromptSubmit, SessionStart) and 4 allowed tools.

ruvnet/RuView · not measured

claude-cookbooks

Agent settings declaring 2 hook events (SessionStart, PreToolUse).

anthropics/claude-cookbooks · not measured

orm

Agent settings declaring 4 hook events (PreToolUse, PostToolUse, WorktreeCreate, Stop) and 21 allowed tools.

prisma/orm · not measured

claude-code-best-practice

Agent settings declaring 30 hook events (PreToolUse, PermissionRequest, PostToolUse, PostToolUseFailure) and 24 allowed tools.

shanraisshan/claude-code-best-practice · not measured