Building edition of iaiops — facility / HVAC / BMS / 厂务 over BACnet/IP (ASHRAE 135): Who-Is discovery, object/point lists, presentValue snapshots, COV capture, TrendLog reads, one MOC-gated property write; plus Modbus-TCP/RTU for meters/chillers and optional plain MQTT for IoT sensors, with the cross-protocol brain.…
Clinical-facility edition of iaiops — hospital / healthcare facilities as a distinct vertical from generic building management, with patient-safety framing. BACnet/IP BMS (isolation-room pressurization + medical-gas source monitoring), Modbus (medical-gas alarm panels / energy meters), OPC-UA (plant SCADA), plus the…
Fab edition of iaiops — semiconductor / display (panel TFT-LCD/OLED) fab equipment over SECS/GEM (SEMI E5 SECS-II, E30 GEM, E37 HSMS) plus OPC-UA for the equipment's internal control layer, with the cross-protocol brain (downtime root-cause copilot, OEE, asset inventory, data quality). Use when the task mentions…
A read-only integration for Phoenix Contact PLCnext Control and virtual PLC systems. It reads process data through standard OPC-UA and Modbus-TCP servers, which are protocols for exchanging industrial-control data.
Renewables edition of iaiops — solar PV plants and wind farms: PV inverters / string combiners and wind-turbine controllers over Modbus (SUN2000 / Growatt / generic wind-turbine templates), plant SCADA over OPC-UA, and MQTT-Sparkplug telemetry, plus the cross-protocol brain (PdM, downtime, OEE, alarm) and a renewables…
Governed, vendor-neutral OT data tap + intelligent troubleshooting for AI agents — 14 field protocols (OPC-UA / Modbus-TCP+RTU / S7comm / Mitsubishi MC / Omron FINS / MTConnect / MQTT-Sparkplug / EtherNet-IP / EtherCAT / SECS-GEM / PROFINET / BACnet / HART-IP / IO-Link) with a built-in governance harness (audit…
★not rated 7 yesterdayA
tokens not measured
originalMIT
Sensor edition of iaiops — connect one industrial sensor and read it correctly: draft a sensor profile from a vendor IODD, check it, read one channel once with its unit, accuracy band and verification level, then collect. Covers sensors on Modbus RTU/TCP (RS-485 / RS-232 / RS-422 / USB serial, 4–20 mA via I/O…
A read-only data connection for monitoring electrical substations and utility control equipment through IEC-104, DNP3, and IEC 61850 MMS. These are industry protocols used to exchange status and measurement data between control systems and field devices.
A read-only MCP server for industrial power-system monitoring using IEC-104, DNP3, and IEC-61850, which are communication standards used by electrical equipment. It runs through the iaiops-energy Python package and requires three configuration values.
★not rated 1 3d agoA
tokens not measured
originalMIT
At most 3 mods per repository are shown here, and a mod shipped inside a plugin is left to that plugin's page — the rest are on their repository pages: