lab-hardware-cad

Lab Hardware CAD

Design physical research hardware as parametric Python source, export STEP as the authoritative artifact, and verify the result both numerically and visually before anything is fabricated.

The hard part of lab hardware is almost never the geometry. It is that the part must mate with equipment whose dimensions are fixed by a published standard or a vendor drawing. A holder that is 0.5 mm too wide does not fit the plate reader; a channel with the wrong aspect ratio collapses during bonding; a mount whose bolt pattern is 25.4 mm instead of 25.0 mm will not reach the optical table. This skill exists to keep those numbers correct and checked.

When to use

Use for any request to design, model, or fabricate a physical part for a lab: chip, mold, mount, adapter, holder, rack, bracket, enclosure, jig, fixture, arena, or maze. Also use to inspect or modify an existing STEP file.

Do not use for finite-element analysis, computational fluid dynamics, molecular structure, or scientific plotting. Those are different skills.

Setup

uv venv --python 3.12 .venv-labcad
uv pip install --python .venv-labcad/bin/python "build123d==0.11.1" "matplotlib>=3.8"

build123d 0.11.1 requires Python >=3.10,<3.15 and pulls in the OpenCascade kernel through cadquery-ocp-novtk. The wheel is large; install once per project and reuse it.

All bundled scripts take --help. check.py standards runs without build123d installed.

Model files are executed, not parsed. gen.py, check.py, and snapshot.py import a *_model.py and call its build(), which runs arbitrary Python in the current environment. That is inherent to parametric CAD — the source is the design. Only run model files authored in this session or supplied by the user from a trusted location. If a model came from the internet, a shared drive, or an untrusted colleague, read it before running it and say that you did.

Required workflow

Follow these steps in order. Steps 5 and 6 are not optional, and step 6 is not waived by step 5 passing.