neqsim-dynamic-instrument-controller-setup

neqsim-dynamic-instrument-controller-setup is a skill for Claude Code, Codex from equinor/neqsim-community-skills. It costs 59 tokens per session (1,716 once invoked), scanned A, original, Apache-2.0.

A setup guide for measurement devices and PID controllers in dynamic NeqSim process models. PID control adjusts a valve or other item using the difference between a measured value and its target, called the setpoint.

In plain words
What is it for?
Use it to add level, pressure, temperature, or flow transmitters; control valves or equipment; set ranges and setpoints; check direct or reverse action; and run transient validation.
Why use it?
It helps ensure measurements, controller direction, limits, and manipulated equipment are connected correctly before a time-based simulation. It also documents an event-log workflow for tuning studies.

Skill for Claude CodeCodex

Written for no agent in particular: nothing here depends on one.

Good fit Use it to add level, pressure, temperature, or flow transmitters; control valves or equipment; set ranges and setpoints; check direct or reverse action; and run transient validation.

Compare 6 skills from other repositories ↓
Install with agentmods
npx agentmods add skills/equinor/neqsim-community-skills/neqsim-dynamic-instrument-controller-setup
Install

Getting it into your agent

One page per mod, every tool's command on it. A separate URL per tool would split the same page into five that compete with each other.

Any agent
npx skills add equinor/neqsim-community-skills --skill neqsim-dynamic-instrument-controller-setup
Clone the repo
git clone --depth 1 https://github.com/equinor/neqsim-community-skills

Made for: Claude Code, Codex.

Wrote this? Show the measurements

A badge with what this costs and how it scanned, read live from this page, so it follows the numbers instead of freezing them. Markdown for a README, HTML for a documentation site or a project page.

agentmods badge for neqsim-dynamic-instrument-controller-setup

README.md
[![agentmods](https://agentmods.dev/badge/skills/equinor/neqsim-community-skills/neqsim-dynamic-instrument-controller-setup/github.svg)](https://agentmods.dev/skills/equinor/neqsim-community-skills/neqsim-dynamic-instrument-controller-setup)
Your own site
<a href="https://agentmods.dev/skills/equinor/neqsim-community-skills/neqsim-dynamic-instrument-controller-setup"><img src="https://agentmods.dev/badge/skills/equinor/neqsim-community-skills/neqsim-dynamic-instrument-controller-setup/github.svg" alt="Measured on agentmods" height="20"></a>

Or the 80×15 button, for a site that already has a row of RSS and ATOM ones. Only the verdict fits; the numbers stay here.

agentmods 80×15 button for neqsim-dynamic-instrument-controller-setup

Your own site · 80×15
<a href="https://agentmods.dev/skills/equinor/neqsim-community-skills/neqsim-dynamic-instrument-controller-setup"><img src="https://agentmods.dev/badge/skills/equinor/neqsim-community-skills/neqsim-dynamic-instrument-controller-setup.svg" alt="Reviewed on agentmods" width="80" height="20"></a>
Per session 59 Skills are progressive disclosure: only the name and description are preloaded; the body loads when the skill is used.
When invoked 1,716 The whole file, excluding the scripts and references it only reads on demand.
Security scan A 0 findings. A grade says what 26 rules found in the file — not that it is safe.
Origin original No closer match found in the catalogue.
Token cost

What it costs to keep this loaded

Counted locally with the o200k_base tokenizer, which is exact for GPT models; Claude uses its own tokenizer and its counts differ. Treat this as one consistent yardstick across the catalogue rather than a bill. Prices are per million input tokens.

ModelPer sessionOnce invoked
Fable 5.1 $0.00059 $0.01716
Opus 5.5 $0.00024 $0.00686
Sonnet 5.5 $0.00012 $0.00343
Haiku 4.5 $0.00006 $0.00172

Measured 1mo ago against content hash 6ae72409767d, method: parsed. Prices are Anthropic first-party input rates as of 2026-10-07, from the pricing page.

Security

Grade A, and why

neqsim-dynamic-instrument-controller-setup scanned grade A with 0 findings against 26 rules in 11 categories — prompt injection, anti-refusal, data exfiltration, privilege escalation, supply chain, agent snooping, system-prompt leakage, SSRF and excessive agency — measured 1mo ago.

The scan reads SKILL.md. This mod also ships 4 executable files (examples/basic_controller_setup.py, src/dynamic_instrument_controller_setup/__init__.py, src/dynamic_instrument_controller_setup/model.py, …), listed below but not scanned — reading those needs a real analyzer, not pattern matching.

A static scan of the body, not an audit. Every finding is printed with the line that produced it so you can judge whether it matters here. A mod is markdown that instructs an agent; that is exactly why what it instructs is worth reading.

Nothing flagged

None of the 26 patterns this scan looks for appear in this file: no shell pipes, no recursive deletes, no credential paths, no hidden text, no instruction-override or anti-refusal phrasing, no agent-config snooping. That is not a guarantee, it is the absence of the things that are checkable.

skills/process/neqsim-dynamic-instrument-controller-setup/SKILL.md · 172 lines

How it starts

The opening of the file, as written. The whole thing — 172 lines — stays where its author put it; the contents beside it link to each section on GitHub.

Dynamic Instrument Controller Setup

Use this skill when an agent must add instruments and controllers to a NeqSim dynamic process model. It documents transmitter selection, controller configuration, valve or equipment manipulation, direct/reverse action checks, and transient validation.

When to Use

  • When a dynamic NeqSim model needs level, pressure, temperature, or flow measurement devices.
  • When a process valve or unit should be manipulated by a controller during runTransient().
  • When an agent needs to create public controller setup guidance with setpoints, min/max transmitter ranges, and PID parameters.
  • When controller event logs and autoTuneFromEventLog(False) should be used for tuning studies.

Inputs

  • loop_name: public loop identifier such as LC-001 or PC-001.
  • controlled_variable: measured variable such as level, pressure, temperature, or flow.
  • transmitter_target: NeqSim unit or stream that the transmitter measures.
  • manipulated_equipment: valve or equipment receiving the controller.
  • setpoint: controller setpoint in the same basis as the transmitter.
  • minimum_value and maximum_value: transmitter validation range.
  • reverse_acting: whether controller output decreases when measured value increases.
  • kp, ti, td: PID parameters for ControllerDeviceBaseClass#setControllerParameters(...).

Outputs

  • loop_ready: boolean indicator for whether the supplied loop metadata is complete and internally consistent.
  • transmitter_class: recommended NeqSim transmitter class.
  • controller_steps: NeqSim API sequence for creating and attaching the control loop.
  • validation_warnings: missing range, action, setpoint, or tuning issues.
  • autotune_steps: optional event-log and setpoint-step workflow.

Engineering Method

The Python class DynamicInstrumentControllerModel is a public control-loop setup checker. It does not tune or run NeqSim. It maps a controlled variable to a known NeqSim measurement-device class and validates that the controller metadata is sufficient for a dynamic simulation workflow.

Read the full file on GitHub · 172 lines

Files

What ships with it

6 files beside SKILL.md in the same directory: the scripts, references and assets a skill reads on demand. Not counted in the per-session cost; read them before you install if any of them is executable.

Changes

What this file has done since we first saw it

Hashed on every crawl. A supply-chain change to an agent config is a question of when, not whether, so the history is kept rather than the latest state alone.

  1. 1mo ago First seen · 172 lines · 59 tokens per session scan A 6ae72409767d

Subscribe to this mod's changes

neqsim-dynamic-instrument-controller-setup is a skill published in the GitHub repository equinor/neqsim-community-skills (4 stars, last pushed today), licensed Apache-2.0. It adds 59 tokens to every session and 1,716 once invoked, about $0.0002 per session on Opus 5.5. A static security scan graded it A with 0 findings. No closer match exists in the catalogue, so it is treated as the original; first seen 2026-09-19.

Related

neqsim-dynamic-instrument-controller-setup compared with skills from other repositories

neqsim-dynamic-instrument-controller-setup next to 6 skills from other repositories
ModTypeStarsLast pushLicenceScanTokensWorks with
neqsim-dynamic-instrument-controller-setupequinor/neqsim-community-skillsSkill4todayApache-2.0A59Claude Code, Codex
instrument-data-to-allotropeanthropics/knowledge-work-pluginsSkill35k3d agoApache-2.0A123Claude Code
exploratory-data-analysisK-Dense-AI/scientific-agent-skillsSkill56k4d agoMITA83Claude Code
matlabK-Dense-AI/scientific-agent-skillsSkill56k4d agoMITA44Claude Code
phylogeneticsK-Dense-AI/scientific-agent-skillsSkill56k4d agoMITA71Claude Code, Codex
research-engineerdavila7/claude-code-templatesSkill33kyesterdayMITA43Claude Code, Codex
mapping-to-snomedmaziyarpanahi/openmedSkill5.8kyesterdayApache-2.0A205Claude Code