Borrowing it
Nothing to install: this file belongs to indecenti/NucleoOs. Take a copy, put it at the same path in your own repository, and replace the rules that are about this project with yours.
curl -O https://raw.githubusercontent.com/indecenti/NucleoOs/main/.claude/agents/board-bringup-verifier.mdgit clone --depth 1 https://github.com/indecenti/NucleoOsWrote this? Show the measurements
A badge with what this costs and how it scanned, read live from this page, so it follows the numbers instead of freezing them. Markdown for a README, HTML for a documentation site or a project page.
[](https://agentmods.dev/agents/indecenti/nucleoos/board-bringup-verifier)<a href="https://agentmods.dev/agents/indecenti/nucleoos/board-bringup-verifier"><img src="https://agentmods.dev/badge/agents/indecenti/nucleoos/board-bringup-verifier/github.svg" alt="Measured on agentmods" height="20"></a>Or the 80×15 button, for a site that already has a row of RSS and ATOM ones. Only the verdict fits; the numbers stay here.
<a href="https://agentmods.dev/agents/indecenti/nucleoos/board-bringup-verifier"><img src="https://agentmods.dev/badge/agents/indecenti/nucleoos/board-bringup-verifier.svg" alt="Reviewed on agentmods" width="80" height="20"></a>What it costs to keep this loaded
Counted locally with the o200k_base tokenizer, which is exact for GPT models; Claude uses its own tokenizer and its counts differ. Treat this as one consistent yardstick across the catalogue rather than a bill. Prices are per million input tokens.
| Model | Per session | Once invoked |
|---|---|---|
| Fable 5.1 | $0.00080 | $0.00420 |
| Opus 5.5 | $0.00032 | $0.00168 |
| Sonnet 5.5 | $0.00016 | $0.00084 |
| Haiku 4.5 | $0.00008 | $0.00042 |
Grade A, and why
board-bringup-verifier scanned grade A with 1 finding against 26 rules in 11 categories — prompt injection, anti-refusal, data exfiltration, privilege escalation, supply chain, agent snooping, system-prompt leakage, SSRF and excessive agency — measured 2mo ago.
A static scan of the body, not an audit. Every finding is printed with the line that produced it so you can judge whether it matters here. A mod is markdown that instructs an agent; that is exactly why what it instructs is worth reading.
Makes network callslowCapability
Not a fault in itself. Listed so you know the mod talks to something, and to what.
You do NOT build, flash, or deploy — those are the user's explicit call. Use `curl` via Bash for The source is not reproduced here
A licence we could not identify
The repository carries a LICENSE file, but it is custom or dual enough that GitHub cannot name it and neither can this catalogue. Unknown terms are not permission, so the body is not copied here. Read the licence at the source and decide for yourself.
What this file has done since we first saw it
Hashed on every crawl. A supply-chain change to an agent config is a question of when, not whether, so the history is kept rather than the latest state alone.
- 2mo ago First seen · 25 lines · 80 tokens per session scan A fe0939bc4aef
board-bringup-verifier is an agent published in the GitHub repository indecenti/NucleoOs (94 stars, last pushed today), with no licence file. It adds 80 tokens to every session and 420 once invoked, about $0.0003 per session on Opus 5.5. A static security scan graded it A with 1 finding (makes network calls). No closer match exists in the catalogue, so it is treated as the original; first seen 2026-08-30.
Other agents, from other repositories
volt
Designs firmware architectures, HAL boundaries, RTOS selection, and OTA rollback strategies for ESP32, STM32, nRF52, and RP2040 targets. Use when you need a firmware architecture, OTA update strategy, or embedded security design. Trigger with "design my firmware architecture", "help me add OTA updates".
bus-driver-engineer
Use this agent when writing, porting, or debugging an I2C, SPI, UART, CAN, or USB driver: a stuck bus or reads of 0xFF, choosing DMA, interrupt, or polled transfers, baud rate and CAN bit timing math, error recovery, or peripheral quirks on STM32, NXP, Nordic, and ESP32. It returns the init sequence, sync and async…
iot-protocol-engineer
Use this agent when choosing or designing connectivity for a device: MQTT, CoAP, LwM2M, BLE GATT, LoRaWAN, Thread, or Zigbee selection, topic and QoS design, power budgets, TLS or DTLS, or debugging disconnects and latency. It walks the constraint matrix before recommending a protocol, then designs the protocol layer…
bootloader-engineer
Use this agent when designing or reviewing a bootloader: primary, secondary, and golden image topologies, image headers, flash erase and program sequences, CRC32 and ECDSA signature checks with mbedTLS, the jump to the application, or OTP-based rollback prevention. It returns a flash layout, a boot decision tree, the…
bare-metal-engineer
Use this agent when writing firmware without a HAL: register-level drivers, linker scripts, startup code, a minimal runtime without the standard library, compiler flags, volatile and memory barrier questions, or reading a map file. It works directly against peripheral registers with arm-none-eabi-gcc and explains the…
fpga-engineer
Use this agent when an MCU has to talk to an FPGA: AXI-Lite or SPI register banks in Verilog, Vivado or Quartus flows, XDC timing constraints, the MCU-side driver, or choosing the MCU-FPGA interface. It returns the register map, the Verilog module, the constraints, and the MCU driver.