recomputer-veye-compat-fix

recomputer-veye-compat-fix is a skill for Claude Code, Codex from Seeed-Projects/Seeed-Jetson-DevelopTool. It costs 40 tokens per session (927 once invoked), scanned B, original, MIT.

A firmware repair procedure for making a VEYE camera appear correctly on a reComputer Jetson. It updates the VL822 USB hub chip that handles the camera connection.

In plain words
What is it for?
Use it to check the Jetson over SSH, flash the supplied hub firmware, and verify that the VEYE camera is detected.
Why use it?
Old hub firmware can prevent the camera from being detected on the device bus, leaving the camera unusable.

Skill for Claude CodeCodex

Written for no agent in particular: nothing here depends on one.

Good fit Use it to check the Jetson over SSH, flash the supplied hub firmware, and verify that the VEYE camera is detected.

Compare 6 skills from other repositories ↓
Install with agentmods
npx agentmods add skills/seeed-projects/seeed-jetson-developtool/recomputer-veye-compat-fix
Install

Getting it into your agent

One page per mod, every tool's command on it. A separate URL per tool would split the same page into five that compete with each other.

Any agent
npx skills add Seeed-Projects/Seeed-Jetson-DevelopTool --skill recomputer-veye-compat-fix
Clone the repo
git clone --depth 1 https://github.com/Seeed-Projects/Seeed-Jetson-DevelopTool

Made for: Claude Code, Codex.

Wrote this? Show the measurements

A badge with what this costs and how it scanned, read live from this page, so it follows the numbers instead of freezing them. Markdown for a README, HTML for a documentation site or a project page.

agentmods badge for recomputer-veye-compat-fix

README.md
[![agentmods](https://agentmods.dev/badge/skills/seeed-projects/seeed-jetson-developtool/recomputer-veye-compat-fix.svg)](https://agentmods.dev/skills/seeed-projects/seeed-jetson-developtool/recomputer-veye-compat-fix)
Your own site
<a href="https://agentmods.dev/skills/seeed-projects/seeed-jetson-developtool/recomputer-veye-compat-fix"><img src="https://agentmods.dev/badge/skills/seeed-projects/seeed-jetson-developtool/recomputer-veye-compat-fix.svg" alt="Measured on agentmods" height="20"></a>
Per session 40 Skills are progressive disclosure: only the name and description are preloaded; the body loads when the skill is used.
When invoked 927 The whole file, excluding the scripts and references it only reads on demand.
Security scan B 1 finding. A grade says what 26 rules found in the file — not that it is safe. Third-party audits
  • NVIDIA SkillSpector warn 7 Sept 2026
SkillSpector: 4 findings, up to medium

These are SkillSpector’s own severities. On a checked sample its high-severity flags on skills were ~96% false positives — a documented command, a public API, a “never do X” rule — so we show them as a caution to read, not a verdict. Why →

  • medium Privilege Escalation · line 25
    Commands invoke sudo or root privileges. Verify this elevated access is necessary and justified.
    Fix: Avoid sudo/root unless strictly required. Prefer least-privilege patterns. If elevation is needed, document the justification and scope.
  • medium Privilege Escalation · line 108
    Commands invoke sudo or root privileges. Verify this elevated access is necessary and justified.
    Fix: Avoid sudo/root unless strictly required. Prefer least-privilege patterns. If elevation is needed, document the justification and scope.
  • medium Privilege Escalation · line 75
    Commands invoke sudo or root privileges. Verify this elevated access is necessary and justified.
    Fix: Avoid sudo/root unless strictly required. Prefer least-privilege patterns. If elevation is needed, document the justification and scope.
  • medium Privilege Escalation · line 94
    Commands invoke sudo or root privileges. Verify this elevated access is necessary and justified.
    Fix: Avoid sudo/root unless strictly required. Prefer least-privilege patterns. If elevation is needed, document the justification and scope.
How audits are shown
Origin original No closer match found in the catalogue.
Token cost

What it costs to keep this loaded

Counted locally with the o200k_base tokenizer, which is exact for GPT models; Claude uses its own tokenizer and its counts differ. Treat this as one consistent yardstick across the catalogue rather than a bill. Prices are per million input tokens.

ModelPer sessionOnce invoked
Fable 5.1 $0.00040 $0.00927
Opus 5 $0.00020 $0.00464
Sonnet 5 $0.00008 $0.00185
Haiku 4.5 $0.00004 $0.00093

Measured 5d ago against content hash ad1ccf1ea91a, method: parsed. Prices are Anthropic first-party input rates as of 2026-09-08, from the pricing page.

Security

Grade B, and why

recomputer-veye-compat-fix scanned grade B with 1 finding against 26 rules in 11 categories — prompt injection, anti-refusal, data exfiltration, privilege escalation, supply chain, agent snooping, system-prompt leakage, SSRF and excessive agency — measured 5d ago.

A static scan of the body, not an audit. Every finding is printed with the line that produced it so you can judge whether it matters here. A mod is markdown that instructs an agent; that is exactly why what it instructs is worth reading.

Asks for rootmediumPrivilege escalation

A mod that escalates privileges can change anything on the machine, not only the project.

- `i2c-tools` installed on the Jetson (`sudo apt install i2c-tools`).
seeed_jetson_develop/skills/openclaw/recomputer-veye-compat-fix/SKILL.md · 117 lines

How it starts

The opening of the file, as written. The whole thing — 117 lines — stays where its author put it; the contents beside it link to each section on GitHub.

reComputer VEYE Camera Compatibility Fix

The reComputer carrier board uses a VL822 USB hub chip. Outdated VL822 firmware prevents the VEYE camera from appearing on the i2c bus. This procedure flashes updated firmware to the chip.


Execution model

Run steps in order. Each step must complete cleanly before proceeding.

  • If a step fails → stop and consult the failure decision tree.
  • If a step succeeds → continue to the next step.
  • Do not connect USB devices until Step 7 instructs you to.

Prerequisites

  • SSH access to the Jetson (the VEYE camera and all other USB devices must be disconnected before starting).
  • The vl822-fw.tar.bz2 firmware archive from Seeed/VEYE.
  • i2c-tools installed on the Jetson (sudo apt install i2c-tools).

Steps

Step 1 — SSH into Jetson with no USB devices connected

Disconnect the VEYE camera and any other USB peripherals. Connect via SSH only.

ssh <user>@<jetson-ip>

Confirm no USB devices are attached:

lsusb
# Expected: only the internal hub, no camera entries

Step 2 — Copy the firmware archive to the Jetson

From your host machine:

scp vl822-fw.tar.bz2 <user>@<jetson-ip>:~/

Step 3 — Extract the archive and enter the directory

On the Jetson:

tar -xjvf vl822-fw.tar.bz2
cd vl822-fw

Step 4 — Install the firmware

Follow the instructions in readme.md inside the extracted directory:

cat readme.md
# Read and follow the exact steps listed — they may vary by firmware version

The readme will instruct you to run a flash script (e.g., ./flash_vl822.sh or similar). Run it as directed.

Step 5 — Power cycle the board

A full power-off/on cycle is required for the new firmware to take effect. Do not just reboot.

sudo poweroff

Wait at least 5 seconds after the board powers off, then power it back on. Reconnect via SSH.

Step 6 — Verify the firmware version

After the board comes back up:

cd ~/vl822-fw
./run_2822_ver.sh

Read the full file on GitHub · 117 lines

Files

What ships with it

2 files beside SKILL.md in the same directory: the scripts, references and assets a skill reads on demand. Not counted in the per-session cost; read them before you install if any of them is executable.

Changes

What this file has done since we first saw it

Hashed on every crawl. A supply-chain change to an agent config is a question of when, not whether, so the history is kept rather than the latest state alone.

  1. 5d ago First seen · 117 lines · 40 tokens per session scan B ad1ccf1ea91a

Subscribe to this mod's changes

recomputer-veye-compat-fix is a skill published in the GitHub repository Seeed-Projects/Seeed-Jetson-DevelopTool (54 stars, last pushed yesterday), licensed MIT. It adds 40 tokens to every session and 927 once invoked, about $0.0002 per session on Opus 5. A static security scan graded it B with 1 finding (asks for root). No closer match exists in the catalogue, so it is treated as the original; first seen 2026-09-03.

Related

Other skills, from other repositories

gke-compute-classes

Configures, optimizes, and troubleshoots GKE ComputeClasses. Use when configuring Spot VMs with on-demand fallback, targeting specific accelerators (GPUs/TPUs) or machine families, restricting ComputeClass access, or debugging pending pods related to node pool auto-creation. Do not use for cluster-level Node Auto…

google/skills · 83 tokens

jetson-diagnostic

Read-only Jetson health snapshot for identity, memory, GPU, thermal, power, storage, services, and top processes.

NVIDIA/skills · 30 tokens

doca-socket-relay

Use this skill when the operator is driving the DOCA Socket Relay to bridge a socket-oriented host application onto a BlueField DPU peer without rewriting it — picking the deployment shape (in-process, sidecar, or BlueField service container), configuring the host-side socket and the DPU-side forwarding endpoint…

NVIDIA/skills · 236 tokens

offensive-z-wave

Z-Wave attack methodology — sniffing with Z-Force / EZ-Wave / RTL-SDR + ZniffMobile, S0 (legacy) network-key derivation flaw and key reuse, S2 (modern) ECDH commissioning analysis, replay/injection on unauthenticated nodes, default-key brute-force on test deployments, and home-automation hub pivots. Use when targeting…

SnailSploit/Claude-Red · 113 tokens

hsb-flash

Flash the FPGA on an HSB board connected to an NVIDIA devkit. Supports HSB Lattice boards (FPGA versions 2407, 2412, 2507, 2510) and Leopard Imaging VB1940 "all-in-one" cameras (FPGA versions 2507, 2510). Uses release-specific YAML manifests and board-type-specific program commands. Lattice and VB1940 commands must…

NVIDIA/skills · 94 tokens

jetson-validate-image

Use after jetson-flash-image to run static BSP checks, on-target smoke/regression tests on a flashed DUT, or both. Not for build or flash steps. Triggers: validate bsp, on-target validation.

NVIDIA/skills · 50 tokens