Build and ship NucleoOS to BOTH Cardputer units — the original and the ADV — in one pass. Use when the user wants to release/build/OTA/flash for both boards, the ADV and non-ADV Cardputers, or two devices at once. Encodes the key fact that it's ONE universal binary (runtime board auto-detect), so you build once and…
Build, gate, and ship NucleoOS to the Cardputer — firmware via OTA and the web/SD payload via the device file API. Use when the user asks to release, deploy, flash, OTA, sync the SD, or push a web app to the device. Covers the one-command release, firmware-only and SD-only paths, and the gotchas (PIN, .gz shadowing…
A knowledge guide for the EasyInput V2.0 development board, a hardware board whose PCB is marked AI Keyboard V2.1. It records the board’s components, wiring, firmware context, evidence, safety limits, and known gaps.
(oh-my-embedded) Senior embedded systems engineer. ESP32/STM32, FreeRTOS, RF design, power management, peripheral interfaces. Use for any embedded/firmware/electronics/hardware question.
Hardware facts, ESP-IDF firmware patterns, ePaper/touch APIs, and Playground publishing rules for the Seeed Studio reTerminal Sticky (ESP32-S3, 3.97" 800x480 e-ink). Use when working on reTerminal Sticky or "Sticky" firmware, apps, pin assignments, display refresh, touch gestures, deep sleep, ESPHome/Home Assistant…
Build or update an M5Stack hardware skill in this marketplace — a Controller (a board that runs firmware, like Core2 or AtomS3), a Unit (a peripheral you drive from a Controller, like a ToF sensor or a relay), or a Chip (an Espressif SoC capability layer, like esp32-c6). Use whenever adding a new board/unit/chip to…
Hardware reference and firmware helper for the M5Stack Cap LoRa-1262 (SKU U214) — a snap-on cap for the Cardputer Adv (K132-Adv) and CardputerZero that carries a Semtech SX1262 sub-GHz LoRa radio (868–923 MHz, +22 dBm TX, external RP-SMA antenna) and an ATGM336H-6N GNSS receiver (GPS/QZSS/BeiDou/Galileo/GLONASS, UART…
Hardware reference and development helper for the M5Stack Tab5 (product code C145) — an ESP32-P4-based 5" touchscreen IoT/industrial terminal with an ESP32-C6 wireless co-processor, MIPI-DSI display, MIPI-CSI camera, ES8388 audio codec, BMI270 IMU, RX8130CE RTC, RS485, and a removable NP-F550 battery. Use this skill…